Icom IC-746PRO
Triple conversion superheterodyne receiver
Base, 160m-6m, 2m
Supply Voltage: 13.8VDC @ 23A Max
Power Output: 5-100W (SSB, CW, RTTY, FM), 5-40W (AM)
Built-in Tuner for 160-6m
3 Antenna Inputs, 2 for HF, and one for 2m
The 746PRO is equipped with the matching SP-21 External Speaker and PS-125 Power Supply. I recently had the backlight repaired. This is my primary radio for 2m nets.
Icom IC-7300
Direct sampling receiver
Base, 160m-6m
Supply Voltage: 13.8VDC @21A Max
Power Output: 5-100W (SSB, CW, RTTY, FM), 1–25W (AM)
Built-in Tuner for 160-6m
1 Antenna Input
This is my primary HF radio.
Kenwood TM-V71A
Mobile, Dual Band, 2m/70cm
Supply Voltage: 13.8VDC
Power Output: 5W/10W/50W (both VHF and UHF)
This is installed in my shack, and is my primary radio for 440, and my back up to 2m.
Alinco DR-235 MkIII
Mobile, Single Band, 1.25m
Supply Voltage: 13.8VDC
Power Output: 5W/10W/25W
This is installed in my shack, and is my primary for 220MHz.
Anytone AT-5888UV III
Mobile, Tri-Band, 2m/1.25m/70cm
Supply Voltage: 13.8VDC
Power Output (2m): 5W/10W/20W/50W
Power Output(1.25m): 5W/10W/15W/25W
Power Output (70cm): 5W/10W/20W/35W
This is installed in my car, and is my workhorse radio on the road.
Baofeng BF-F8HP
HT, Dual Band, 2m/70cm
Supply Voltage: 7.4VDC
Power Output: 1W/4W/8W (7W on UHF)
Baofeng UV-5X3
HT, Tri Band, 2m/1.25m/70cm
Supply Voltage: 7.4VDC
Power Output: Low (2m/1.25m/70cm): 1W
Power Output: High (2m): 5W
Power Output: High (1.25m/70cm): 4W
Power Supply
Power for the radios in the shack (except the 746PRO) is provided by a Tekpower 30A Switching Power Supply (TP30SWII).